CFRP: Epoxy Resin

Contents

What is CFRP?
Epoxy Resin
What are Pre-pregs?
Summary

What is CFRP?

As per the name CFRP (carbon fiber reinforced plastic) is a composite material (type of FRP) whereby a plastic polymer base material is fortified with carbon fibers. The resulting distinctive “lightweight, strong and non-corrosive” qualities has made CFRP a leading material-of-choice across diverse industries and applications.

Carbon fiber itself is a fine yarn-like filament which exhibits exceptional strength but is unable to hold a form on its own. With the product known as CFRP or dry carbon, we composite these strength-obtaining carbon fibers with a plastic polymer to achieve a strong, highly elastic, and formable material.

Epoxy Resin

Resins are broadly divided into two types; 1) thermosetting, which reacts and hardens upon heating, and 2) thermoplastic, which melts upon heating and hardens upon cooling. Thermosetting resins are like cookies and thermoplastic resins can be likened to chocolate. Epoxy resin is the hallmark of thermosetting resins and is widely employed as a matrix for CFRP products due to its superior mechanical properties, heat resistance, and adhesiveness to carbon fibers. We fabricate CFRP products from carbon prepregs; an intermediary material that consists of carbon fibers that are pre-impregnated with resin.

What are Pre-pregs?

The term prepreg refers to a carbon fiber sheet that is pre-impregnated with resin.

Reinforcing carbon fibers that are pre-impregnated with resin prior to curing are typically referred to as carbon prepregs.

Intermediary base material prior to molding (pre-cured)

Prepreg Lamination

Video on carbon prepreg lamination

Autoclaving recognized as the hallmark molding method when it comes to fully eliciting the characteristics of CFRP with the use of prepregs.

Summary

This issue offers an overview of epoxy resins used as the matrix for many CFRP products and the ways in which it is employed.

ABOUT UCHIDA - 55 years since our founding

We leverage a wealth of technical expertise as a CFRP molding and processing manufacturer using FRP, GFRP, and CFRP materials. We offer a one-stop solution, encompassing design, analysis, manufacturing, secondary processing, assembly, painting, quality assurance, and testing.

See Details

UCHIDA's equipment

We have cutting-edge equipment to ensure that we can address even the most advanced challenges of our customers.

DMG森精機 - VS1000/40/2050
X軸：2,050mm（ストローク）／ Y軸：1,000mm ／ Z軸：600mm ／テーブル作業面：2,250×1,000mm

ASHIDA MFG Co., Ltd.
Autoclave Oven 2
Size : Ø1,150x1,000mm / Operating temperature : at normal temperature - 400℃ / Design pressure : 2.0Mpa (maximum working pressure) / Vacuum system : back suction system / Vacuum units : 5

ASHIDA MFG Co., Ltd.
Autoclave Oven 3
Size : Ø3,000x6,000mm / Operating temperature : at normal temperature - 200℃ / Distribution accuracy : ±2.5℃less / Heating rate : 4.0℃/min. (empty furnace) / Cooling rate : 4.0℃/min. (empty furnace) / Design pressure : 0.99Mpa (maximum working pressure) / Working pressure : 0.7Mpa less (if no specification from the manufacuturer 0.3Mpa around) / Pressure accuracy : ±0.02Mpa（for pressure setting of ０ - 0.99Mpa/cm²） / Boost pressure accuracy : 0 - 0.03Mpa/min / Pressure source : compressed air (regular use) / Vacuum system : back suction system / Vacuum units : 10

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

Oven
Size : W1,000xH1,000xD1,000mm / Temperature range : Environmental Temperature +20 - 300℃ / Temperature elevation capability : Environmental Temperature (20 - 40℃) - 300℃ / 45min less / Vacuum system : back suction system / Vacuum units : 10

ESPEC CORP.
Temperature & Humidity Chamber

INSTRON
Static Universal Testing Machine 5985

Oven
Size : W7,000xH3,000xD2,000mm / Temperature range : Environmental Temperature +20 - 300℃ (Max) / Temperature elevation capability : Environmental Temperature (20 - 40℃) - 300℃ / 60min less / Vacuum system : back suction system / Vacuum units : 10

NEO
X axis : 4,000mm (stroke) / Y axis : 2,000mm / Z axis : 1,200mm / C axis : 0° - ±270° / B axis : 0° - ±110° / Table working place : 4,000x2,000mm

【開発】
3Dプリンター | Markforged

Painting booth
Various painting, and clear finish is done in dedicated painting booth

Adhesion, Finishing, Coating Room
Finishing process, such as trimming, drilling, and bonding, surface treatment of the molded product type and is done in a private booth

Toshiba Matrixeye EX (Ultrasonic flaw detector)
Matrix-Arrey : 32

AMETEK CREAFORM Metra
SCAN750 Elite (3D scan)

Olympus Corp.
Inverted Microscopes

Oven
Size : W450xH450xD450mm / Temperature range : Environmental Temperature +20 - 650℃ / Temperature elevation capability : Environmental Temperature+50 - 650℃/120min less

Cutting Plotter Table working place : W1,500xL3,500mm

SHIMA SEIKI MFG., LTD
Cutting Plotter

KUKA
Robot

Krauss Maffei
Epoxy resin injection machine Resin 60L ／ Hardener 25L

Krauss Maffei
630t Press machine Height total 5,200mm ／ Length max 1,500mm ／ Width max 1,200mm ／ Whole cycle time per component part 240sec

DMG森精機 - NV5000B/40
X軸：1,020mm（ストローク）／ Y軸：510mm ／ Z軸：510mm ／テーブル作業面：1,320×600mm

Big sized clean room
JIS B 9920 cleanliness class maximum concentration (Pcs/m³） / Class 5 : 100,000m³ / Capacity : m² (16,000x16,000mm) 760m² (16,000x16,000x3,000mm) / Temperature and humidity condition : Temperature : 23℃±3℃, Humidity 65% less / Ambient conditions : Temperature 35℃ during summer, Humidity 70% less / Ambient conditions : Temperature 35℃ during summer, Humidity 70% less / Temperature -5℃ during winter, Humidity 40% less