CFRP Heat Resistance Temperatures

Contents

What is the Heat Resistance Temperature of CFRP?
CFRTP：Carbon Fiber Reinforced Plastic Made with Thermoplastic Resin

What is the Heat Resistance Temperature of CFRP?

While CFRP is a high-strength and lightweight composite material made with carbon fiber, the heat resistance temperature will vary depending on the plastic resin used as the matrix. CFRPs are typically created with an epoxy resin and products are usually molded at temperatures between 130℃ and 180℃. The heat resistance of these CFRPs varies depending on the continuous use temperatures and the application environment, but will generally have a heat resistance of approximately 100℃ (as a reference).

CFRTP：Carbon Fiber Reinforced Plastic Made with Thermoplastic Resin

CFRTP has the same basic idea: the heat resistance temperature is determined by the resin. We select the resin and manufacture the CFRP based on the heat resistant requirements of the end product.

ABOUT UCHIDA - 55 years since our founding

We leverage a wealth of technical expertise as a CFRP molding and processing manufacturer using FRP, GFRP, and CFRP materials. We offer a one-stop solution, encompassing design, analysis, manufacturing, secondary processing, assembly, painting, quality assurance, and testing.

See Details

UCHIDA's equipment

We have cutting-edge equipment to ensure that we can address even the most advanced challenges of our customers.

DMG森精機 - VS1000/40/2050
X軸：2,050mm（ストローク）／ Y軸：1,000mm ／ Z軸：600mm ／テーブル作業面：2,250×1,000mm

ASHIDA MFG Co., Ltd.
Autoclave Oven 2
Size : Ø1,150x1,000mm / Operating temperature : at normal temperature - 400℃ / Design pressure : 2.0Mpa (maximum working pressure) / Vacuum system : back suction system / Vacuum units : 5

ASHIDA MFG Co., Ltd.
Autoclave Oven 3
Size : Ø3,000x6,000mm / Operating temperature : at normal temperature - 200℃ / Distribution accuracy : ±2.5℃less / Heating rate : 4.0℃/min. (empty furnace) / Cooling rate : 4.0℃/min. (empty furnace) / Design pressure : 0.99Mpa (maximum working pressure) / Working pressure : 0.7Mpa less (if no specification from the manufacuturer 0.3Mpa around) / Pressure accuracy : ±0.02Mpa（for pressure setting of ０ - 0.99Mpa/cm²） / Boost pressure accuracy : 0 - 0.03Mpa/min / Pressure source : compressed air (regular use) / Vacuum system : back suction system / Vacuum units : 10

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

Oven
Size : W1,000xH1,000xD1,000mm / Temperature range : Environmental Temperature +20 - 300℃ / Temperature elevation capability : Environmental Temperature (20 - 40℃) - 300℃ / 45min less / Vacuum system : back suction system / Vacuum units : 10

ESPEC CORP.
Temperature & Humidity Chamber

INSTRON
Static Universal Testing Machine 5985

Oven
Size : W7,000xH3,000xD2,000mm / Temperature range : Environmental Temperature +20 - 300℃ (Max) / Temperature elevation capability : Environmental Temperature (20 - 40℃) - 300℃ / 60min less / Vacuum system : back suction system / Vacuum units : 10

NEO
X axis : 4,000mm (stroke) / Y axis : 2,000mm / Z axis : 1,200mm / C axis : 0° - ±270° / B axis : 0° - ±110° / Table working place : 4,000x2,000mm

【開発】
3Dプリンター | Markforged

Painting booth
Various painting, and clear finish is done in dedicated painting booth

Adhesion, Finishing, Coating Room
Finishing process, such as trimming, drilling, and bonding, surface treatment of the molded product type and is done in a private booth

Toshiba Matrixeye EX (Ultrasonic flaw detector)
Matrix-Arrey : 32

AMETEK CREAFORM Metra
SCAN750 Elite (3D scan)

Olympus Corp.
Inverted Microscopes

Oven
Size : W450xH450xD450mm / Temperature range : Environmental Temperature +20 - 650℃ / Temperature elevation capability : Environmental Temperature+50 - 650℃/120min less

Cutting Plotter Table working place : W1,500xL3,500mm

SHIMA SEIKI MFG., LTD
Cutting Plotter

KUKA
Robot

Krauss Maffei
Epoxy resin injection machine Resin 60L ／ Hardener 25L

Krauss Maffei
630t Press machine Height total 5,200mm ／ Length max 1,500mm ／ Width max 1,200mm ／ Whole cycle time per component part 240sec

DMG森精機 - NV5000B/40
X軸：1,020mm（ストローク）／ Y軸：510mm ／ Z軸：510mm ／テーブル作業面：1,320×600mm

Big sized clean room
JIS B 9920 cleanliness class maximum concentration (Pcs/m³） / Class 5 : 100,000m³ / Capacity : m² (16,000x16,000mm) 760m² (16,000x16,000x3,000mm) / Temperature and humidity condition : Temperature : 23℃±3℃, Humidity 65% less / Ambient conditions : Temperature 35℃ during summer, Humidity 70% less / Ambient conditions : Temperature 35℃ during summer, Humidity 70% less / Temperature -5℃ during winter, Humidity 40% less