Processing CFRTP

Contents

CFRTP Characteristics
CFRP: Thermosetting Resin
- Main Molding Method
- Suitable Applications and Uses
CFRTP: Carbon Fiber Reinforced Thermoplastic
- Main Molding Method and Uses
- Summary

CFRTP Characteristics

CFRP (thermosetting resin) and CFRTP (thermoplastic resin) have relatively similar carbon fiber properties, but vastly distinct characteristics due to the differing resin matrixes.

CFRP: Thermosetting Resin

The thermosetting resin used in CFRP undergoes a chemical reaction that causes the material to harden (cure) when heated.

Main Molding Method

Autoclave molding, the hallmark method, excels in small-volume production and thin or large structural parts. This method does not require compression molding whereby the material is closed and pressed between an upper and lower mold, reducing costs.

Suitable Applications and Uses

Thermosetting resin based CFRP is ideal for creating molds for prototype development. Autoclave molding has few shape constraints and can be used to create prototypes for CFRTP products.

ASHIDA MFG Co., Ltd.
Autoclave Oven 3
Size : Ø3,000×6,000mm / Operating temperature : at normal temperature – 200℃ / Distribution accuracy : ±2.5℃less / Heating rate : 4.0℃/min. (empty furnace) / Cooling rate : 4.0℃/min. (empty furnace) / Design pressure : 0.99Mpa (maximum working pressure) / Working pressure : 0.7Mpa less (if no specification from the manufacuturer 0.3Mpa around) / Pressure accuracy : ±0.02Mpa（for pressure setting of ０ – 0.99Mpa/cm²） / Boost pressure accuracy : 0 – 0.03Mpa/min / Pressure source : compressed air (regular use) / Vacuum system : back suction system / Vacuum units : 10

CFRTP: Carbon Fiber Reinforced Thermoplastic

As thermoplastic resin used in CFRTP does not rely on a chemical reaction, it can be produced with shorter lead times, re-melted and reformed, and more easily recycled. Recyclability is one of its most outstanding advantages.

Main Molding Method and Uses

Unlike CFRP, Carbon Fiber Reinforced Thermoplastic is primarily molded with compression molding methods. This makes it more suitable for medium-volume productions with relatively thick walls or vertical sloping.

Summary

We hope this has offered you better insight into the key differences between CFRP and CFRTP. The appropriate manufacturing method will vary depending on the product shape, structure, and production volume or lot. Since heat resistance is dependent on the resin, the choice of material will also depend on the thermal characteristics and specifications of the product.

ABOUT UCHIDA - 55 years since our founding

We leverage a wealth of technical expertise as a CFRP molding and processing manufacturer using FRP, GFRP, and CFRP materials. We offer a one-stop solution, encompassing design, analysis, manufacturing, secondary processing, assembly, painting, quality assurance, and testing.

See Details

UCHIDA's equipment

We have cutting-edge equipment to ensure that we can address even the most advanced challenges of our customers.

DMG森精機 - VS1000/40/2050
X軸：2,050mm（ストローク）／ Y軸：1,000mm ／ Z軸：600mm ／テーブル作業面：2,250×1,000mm

ASHIDA MFG Co., Ltd.
Autoclave Oven 2
Size : Ø1,150x1,000mm / Operating temperature : at normal temperature - 400℃ / Design pressure : 2.0Mpa (maximum working pressure) / Vacuum system : back suction system / Vacuum units : 5

ASHIDA MFG Co., Ltd.
Autoclave Oven 3
Size : Ø3,000x6,000mm / Operating temperature : at normal temperature - 200℃ / Distribution accuracy : ±2.5℃less / Heating rate : 4.0℃/min. (empty furnace) / Cooling rate : 4.0℃/min. (empty furnace) / Design pressure : 0.99Mpa (maximum working pressure) / Working pressure : 0.7Mpa less (if no specification from the manufacuturer 0.3Mpa around) / Pressure accuracy : ±0.02Mpa（for pressure setting of ０ - 0.99Mpa/cm²） / Boost pressure accuracy : 0 - 0.03Mpa/min / Pressure source : compressed air (regular use) / Vacuum system : back suction system / Vacuum units : 10

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

Oven
Size : W1,000xH1,000xD1,000mm / Temperature range : Environmental Temperature +20 - 300℃ / Temperature elevation capability : Environmental Temperature (20 - 40℃) - 300℃ / 45min less / Vacuum system : back suction system / Vacuum units : 10

ESPEC CORP.
Temperature & Humidity Chamber

INSTRON
Static Universal Testing Machine 5985

Oven
Size : W7,000xH3,000xD2,000mm / Temperature range : Environmental Temperature +20 - 300℃ (Max) / Temperature elevation capability : Environmental Temperature (20 - 40℃) - 300℃ / 60min less / Vacuum system : back suction system / Vacuum units : 10

NEO
X axis : 4,000mm (stroke) / Y axis : 2,000mm / Z axis : 1,200mm / C axis : 0° - ±270° / B axis : 0° - ±110° / Table working place : 4,000x2,000mm

【開発】
3Dプリンター | Markforged

Painting booth
Various painting, and clear finish is done in dedicated painting booth

Adhesion, Finishing, Coating Room
Finishing process, such as trimming, drilling, and bonding, surface treatment of the molded product type and is done in a private booth

Toshiba Matrixeye EX (Ultrasonic flaw detector)
Matrix-Arrey : 32

AMETEK CREAFORM Metra
SCAN750 Elite (3D scan)

Olympus Corp.
Inverted Microscopes

Oven
Size : W450xH450xD450mm / Temperature range : Environmental Temperature +20 - 650℃ / Temperature elevation capability : Environmental Temperature+50 - 650℃/120min less

Cutting Plotter Table working place : W1,500xL3,500mm

SHIMA SEIKI MFG., LTD
Cutting Plotter

KUKA
Robot

Krauss Maffei
Epoxy resin injection machine Resin 60L ／ Hardener 25L

Krauss Maffei
630t Press machine Height total 5,200mm ／ Length max 1,500mm ／ Width max 1,200mm ／ Whole cycle time per component part 240sec

DMG森精機 - NV5000B/40
X軸：1,020mm（ストローク）／ Y軸：510mm ／ Z軸：510mm ／テーブル作業面：1,320×600mm

Big sized clean room
JIS B 9920 cleanliness class maximum concentration (Pcs/m³） / Class 5 : 100,000m³ / Capacity : m² (16,000x16,000mm) 760m² (16,000x16,000x3,000mm) / Temperature and humidity condition : Temperature : 23℃±3℃, Humidity 65% less / Ambient conditions : Temperature 35℃ during summer, Humidity 70% less / Ambient conditions : Temperature 35℃ during summer, Humidity 70% less / Temperature -5℃ during winter, Humidity 40% less