What are Carbon Fibers Used For?

Contents

What is Carbon Fiber?
- Key Characteristics of Carbon Fiber
What is Carbon? Delving into CFRPs
- Carbon Fiber Reinforced Plastics
Applications of Carbon Fiber? What is it Used For?
Summary

What is Carbon Fiber?

Carbon fiber is polymer fiber produced by carbonizing acrylic fibers or pitch, a by-product of petroleum, coal, or tar, at high temperatures. Carbon fiber is classified according to the derivative raw material: PAN-based for acrylic fibers, and pitch-based for carbon fiber derived from pitch by-products. Carbon fiber widely used in aircraft, automobile, and sporting equipment industries, due to its lightweight and high tensile strength.

Key Characteristics of Carbon Fiber

One-fourth the specific gravity of iron.
Ten times the specific strength of iron.
Seven times the specific modulus of elasticity, compared to iron.

Carbon fiber is an ultra-fine filament that cannot retain shape on its own. Consequently, it is commonly combined with moldable or shape-holding plastics such as resin.

What is Carbon? Delving into CFRPs

Carbon Fiber Reinforced Plastics

While the term carbon fiber refers to thin strands of carbon, these fiber strands will not retain their form on their own. Thus, they are combined with a resin to retain the shape and maximize its distinct lightweight and strong characteristics. Composite materials are substances composed of two or more constituents, such as carbon fiber and resin, to yield new functions. Carbon fiber reinforced plastic (CFRP) is the name given to a composite created from carbon fiber and resin.

Applications of Carbon Fiber? What is it Used For?

When carbon fiber was invented in 1959, it was predominantly used in golf clubs and fishing rods. Application quickly diversified as industries began to take advantage of its potential for added performances and functionality. Here are some examples.

Summary

In this issue, we discussed carbon fiber and its uses. As a composition of plastic and strength-enhancing fiber, FRP (Fiber Reinforced Plastic) delivers unique “lightweight, strong, and non-corrosive” qualities which are being leveraged in diverse industries around the world. While FRP delivers a vast array of advantages, limitations in productivity, high material costs, and less favorable recyclability continue to disadvantage its application in some areas. We hope this has cast a better light on FRP and its applications.

ABOUT UCHIDA - 55 years since our founding

We leverage a wealth of technical expertise as a CFRP molding and processing manufacturer using FRP, GFRP, and CFRP materials. We offer a one-stop solution, encompassing design, analysis, manufacturing, secondary processing, assembly, painting, quality assurance, and testing.

See Details

UCHIDA's equipment

We have cutting-edge equipment to ensure that we can address even the most advanced challenges of our customers.

DMG森精機 - VS1000/40/2050
X軸：2,050mm（ストローク）／ Y軸：1,000mm ／ Z軸：600mm ／テーブル作業面：2,250×1,000mm

ASHIDA MFG Co., Ltd.
Autoclave Oven 2
Size : Ø1,150x1,000mm / Operating temperature : at normal temperature - 400℃ / Design pressure : 2.0Mpa (maximum working pressure) / Vacuum system : back suction system / Vacuum units : 5

ASHIDA MFG Co., Ltd.
Autoclave Oven 3
Size : Ø3,000x6,000mm / Operating temperature : at normal temperature - 200℃ / Distribution accuracy : ±2.5℃less / Heating rate : 4.0℃/min. (empty furnace) / Cooling rate : 4.0℃/min. (empty furnace) / Design pressure : 0.99Mpa (maximum working pressure) / Working pressure : 0.7Mpa less (if no specification from the manufacuturer 0.3Mpa around) / Pressure accuracy : ±0.02Mpa（for pressure setting of ０ - 0.99Mpa/cm²） / Boost pressure accuracy : 0 - 0.03Mpa/min / Pressure source : compressed air (regular use) / Vacuum system : back suction system / Vacuum units : 10

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

Oven
Size : W1,000xH1,000xD1,000mm / Temperature range : Environmental Temperature +20 - 300℃ / Temperature elevation capability : Environmental Temperature (20 - 40℃) - 300℃ / 45min less / Vacuum system : back suction system / Vacuum units : 10

ESPEC CORP.
Temperature & Humidity Chamber

INSTRON
Static Universal Testing Machine 5985

Oven
Size : W7,000xH3,000xD2,000mm / Temperature range : Environmental Temperature +20 - 300℃ (Max) / Temperature elevation capability : Environmental Temperature (20 - 40℃) - 300℃ / 60min less / Vacuum system : back suction system / Vacuum units : 10

NEO
X axis : 4,000mm (stroke) / Y axis : 2,000mm / Z axis : 1,200mm / C axis : 0° - ±270° / B axis : 0° - ±110° / Table working place : 4,000x2,000mm

【開発】
3Dプリンター | Markforged

Painting booth
Various painting, and clear finish is done in dedicated painting booth

Adhesion, Finishing, Coating Room
Finishing process, such as trimming, drilling, and bonding, surface treatment of the molded product type and is done in a private booth

Toshiba Matrixeye EX (Ultrasonic flaw detector)
Matrix-Arrey : 32

AMETEK CREAFORM Metra
SCAN750 Elite (3D scan)

Olympus Corp.
Inverted Microscopes

Oven
Size : W450xH450xD450mm / Temperature range : Environmental Temperature +20 - 650℃ / Temperature elevation capability : Environmental Temperature+50 - 650℃/120min less

Cutting Plotter Table working place : W1,500xL3,500mm

SHIMA SEIKI MFG., LTD
Cutting Plotter

KUKA
Robot

Krauss Maffei
Epoxy resin injection machine Resin 60L ／ Hardener 25L

Krauss Maffei
630t Press machine Height total 5,200mm ／ Length max 1,500mm ／ Width max 1,200mm ／ Whole cycle time per component part 240sec

DMG森精機 - NV5000B/40
X軸：1,020mm（ストローク）／ Y軸：510mm ／ Z軸：510mm ／テーブル作業面：1,320×600mm

Big sized clean room
JIS B 9920 cleanliness class maximum concentration (Pcs/m³） / Class 5 : 100,000m³ / Capacity : m² (16,000x16,000mm) 760m² (16,000x16,000x3,000mm) / Temperature and humidity condition : Temperature : 23℃±3℃, Humidity 65% less / Ambient conditions : Temperature 35℃ during summer, Humidity 70% less / Ambient conditions : Temperature 35℃ during summer, Humidity 70% less / Temperature -5℃ during winter, Humidity 40% less